TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 337 of 660

REMOVAL - Continued

5.

Loosen set screw (Figure 2, Item 8) and remove sprocket (Figure 2, Item 9) with sprocket alignment key

(Figure 2, Item 1) from roll-up bar (Figure 2, Item 3).

6.

Remove three nuts (Figure 2, Item 5), lockwashers (Figure 2, Item 6), and screws (Figure 2, Item 7) from

driver's side mounting bracket (Figure 2, Item 4) and dump body. Discard lockwashers.

7.

Loosen set screw (Figure 2, Item 2) at each end of roll-up bar (Figure 2, Item 3). Remove driver's side

mounting bracket (Figure 2, Item 4) and roll-up bar. Slide bracket from roll-up bar.

Figure 2.

Roll-Up Bar Removal.

END OF TASK

CLEANING AND INSPECTION

Clean and inspect all components in accordance with General Maintenance Instructions (WP 0072).

END OF TASK

TM 5-3805-264-13&P

0056

0056-3