TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 412 of 660
DISASSEMBLY - Continued
16.
Using two small screwdrivers, remove bottom retaining ring (Figure 11, Item 3) from groove of sleeve
(Figure 11, Item 2). Position four hydraulic cylinder disassembly tools, equally spaced, between bottom
retaining ring and sleeve.
NOTE
Hydraulic cylinder disassembly tools will fall free as sleeve, with bottom retaining ring, is
removed from larger sleeve.
17.
Remove sleeve (Figure 11, Item 1) from sleeve (Figure 11, Item 2). Remove bottom retaining ring
(Figure 11, Item 3) from sleeve.
Figure 11.
Sleeve Removal.
18.
Remove wear ring (Figure 12, Item 1), piston ring (Figure 12, Item 2), and two piston rings
(Figure 12, Item 3) from other end of sleeve (Figure 12, Item
4). Discard wear ring.
Figure 12.
Wear Ring and Piston Ring Removal From Sleeve.
TM 5-3805-264-13&P
0066
0066-8
Back to Top
