TM-5-3805-274-13-P
DUMP TRUCK BODY M917
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
AUGUST 2013
TM-5-3805-274-13-P - Page 98 of 364
Table 1. Operator Preventive Maintenance Checks and Services for M917 Dump Truck Body - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT NOT
READY/AVAILABLE
IF:
16.
During
Hydraulic reservoir
(Figure 16, Item 1),
hose connectors
(Figure 16, Item 2)
under reservoir
(not shown), and
breather cap
(Figure 16, Item 3)
Check hydraulic reservoir and hose
connectors under reservoir for signs of leaks.
Fully raise dump bed and install safety strut.
Check oil level in bottom sight glass, add oil
if level is below sight glass. Check breather
filler cap and clean if clogged.
Class III leaks are
evident or oil level
is below
acceptable level.
1
3
~
2
Figure 16. Hydraulic Reservoir, Connectors, and Breather Cap.
NOTE
Ensure dump bed is lowered before checking
hydraulic reservoir oil level sight glass.
17.
During
Hydraulic reservoir
(Figure 17, Item 1)
Check hydraulic reservoir top oil level sight
glass through hole in front of bed. If not
visible in top sight glass, add oil.
1
~
Figure 17. Top Oil Level Sight Glass.
TM 5-3805-274-13&P
0019
0019-10
Back to Top
