TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

  TM-5-3895-371-24-P - Page 209 of 330

TM 5-3895-371-24 & P
TA 075947
Figure 3-74. Removing Shaft Seal Retainer Capscrews.
(21)
Using a small screwdriver, remove shaft seal assembly (4, fig. 3-60) from mounting
flange assembly (8). (Refer to fig. 3-75.) Remove O-ring (7, fig. 3-60). Press shaft seal assembly (4) from
retainer using an arbor press and a 2-1/2 in. plug.
TA 075948
Figure 3-75.
Removing Shaft Seal Retainer.
(22)
Remove motor shaft (11) and assembled parts of ball bearing (14), and inner race of cover
roller bearing (41), by pulling straight up from mounting flange assembly (8) as shown in figure 3-76.
3-64


Back to Top