TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 188 of 694

TM 5-3895-372-20

WATER SYSTEM.

5-14.

WATER TANK MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A. REMOVAL (Continued).

2.

One chain (3) and

a.

Inspect for damage.

water tank cap (4).

b.

If damaged, refer to Direct Support

Maintenance as welding will be

required.

WARNING

If the water tank cover and/or ladder is to be removed, do not stand on the water tank ladder.

Use a

suitable platform or step ladder.

Use a suitable overhead hoist with a rope or chain attached thru the

strainer assembly hole and around the end of the water tank cover.

3.

Thirty-four screws

a.

Unscrew from water tank cover

(6), thirty-two washers

(2), upper ladder section (10),

(7), two washers (15)

and lower ladder section (11).

and nuts (14).

b.

Remove upper ladder section

(10) and lower ladder section

(11) with one chain (3) and

snap hook (13) attached.

4.

Water tank cover (2).

Attach a suitable chain or rope

Second mechanic guides to

from an overhead hoist thru the

ground and detaches chain or

strainer assembly hole and around

rope.

the end of the water tank cover.

Raise up and away from vehicle,

then lower to ground.

5.

One chain (3) and

Inspect for damage.

Replace as necessary.

snap hook (13).

6.

Two hinge bolts (12).

Remove and separate upper lad-

Welded in place.

der section (10) from lower

ladder section (11).

NOTE

Inspect upper ladder section, lower ladder section, handle, and water tank cover for cracks or breaks.

Repair as necessary by welding, or replace.

5-60