TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 195 of 694
TM 5-3895-372-20
CHAPTER 6
ADMIX SYSTEMS
6-1.
OVERVIEW.
This chapter provides you with the following information related to liquid admix systems maintenance.
a.
All required special tools and equipment.
b.
Troubleshooting procedures.
c.
Maintenance procedures.
Section I REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
6-2.
COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
6-3.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
The special tools, TMDE, and support equipment for liquid and dry admix systems maintenance procedures described in
this chapter are as follows.
(Refer to Organizational Maintenance RPSTL, TM 5-3895-372-20P for tool description and
illustration.)
a.
Air pressure gage, 0-25 psi (0-172 kPa).
b.
Stop watch.
c.
Measuring container, 7 qt (6.6 I1) minimum, calibrated in qts (or liters).
d.
Measuring container, 150 oz (4436 ml) minimum, calibrated in oz (or milliliters).
6-4.
SPARES AND REPAIR PARTS.
Spares and repair parts are listed and illustrated in the Repair Parts and Special Tools List covering Organizational
Maintenance for this equipment (TM 5-3895-372-20P).
6-1
Back to Top
