TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 364 of 694
TM 5-3895-372-20
AGGREGATE SUPPLY SYSTEM.
7-18.
SAND AND STONE CONTROLS MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
D.
INSTALLATION (Continued).
13.
Two shafts (4).
Position thru two angles (7) and install
two gears (5) with two setscrews (6).
14.
Two collars (8).
Slide onto shafts (4) and secure with
two setscrews (6).
15.
Two universal joints (10).
Install on two shafts (4) and secure
Be sure punch marks are
with two pins (11).
properly aligned.
16.
Shaft (13) and (27).
Install in two universal joints (10),
Be sure punch marks are
and secure with two pins (11).
properly alined.
17.
Two locks (14).
Slide over shafts (13) and (27) and
install two lock screws (12).
18.
Guide (15).
Slide onto shafts (13) and (27),
aliening with holes in bracket welded
to sand bin; secure with two screws
(26), two lockwashers (25), and two
nuts (16).
19
Two plates (18), dial
a.
Aline holes and secure with four
face (19), and dial face (24).
screws (20), lockwashers (17), and
nuts (16).
b.
Slide over shafts (13) and (27),
aline holes and secure to guide
(15) with four screws (23), lock-
washers (17) and nuts (16).
20.
Two pointers (21).
Slide onto shafts (13) and (27);
secure with two setscrews (6).
21.
Two wheels (22).
Slide onto shafts (13) and (27);
secure by driving in two pins (11).
NOTE
Check gate adjustment after installation is completed (see TM 5-3895-372-10).
7-72
Back to Top
