TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 402 of 694

TM 5-3895-372-20

CEMENT SYSTEM.

8-13.

METER REGISTER CABLE MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A.

REMOVAL (Continued).|

4. Setscrew (1).

5. Clamp (9), bolt (8),

washer (10), and nut (11).

6. Two adapters (4).

7. Two spring pins (6).

B.

LUBRICATION.I

8. Core (7).

C.

INSTALLATION.

9. Core (7).

10. Cable assembly (12).

11. Two adapters (4).

12. Two drives (3) and (13).

13. Two bolts (8).

D.

OPERATIONAL CHECK.

14. Meter feeder (14).

Loosen.

a. Loosen and remove.

b. Pull

cable

assembly

(12)from

meter

feeder

(14).

Loosen two setscrews (5)

and remove two drives

(3) and (13).

Push from adapters (4) and

remove adapters from cable

assembly (12).

Remove from cable assembly

(12) and grease thoroughly

with GAA.

Reinstall.

a.

Position into two clamps (9).

b.

Install two bolts (8), washers

(10), and nuts (11).

Position on core (7) and install

two spring pins (6).

a.

Position into two adapters

(4) and lock with two set-

screws (5).

b.

Insert drive (13) into meter

feeder (14) and lock with set-

screw (1).

c.

Insert drive (3) into meter

register (2).

Tighten at clamps (9) to secure

cable assembly (12).

a.

Disengage cement bin clutch.

b.

Turn meter feeder manually.

c.

Check that meter register

count changes with each turn.

Turn meter feeder (14) until

setscrew (1) is accessible.

Do not tighten bolts (8) at

this time.

See TM 5-3895-372-10.

8-38