TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 410 of 694
TM 5-3895-372-20
CEMENT SYSTEM.
8-15.
CEMENT SYSTEM DRIVE MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
B.
DISASSEMBLY.
16. Socket setscrew (79).
17. Coupling half (78).
18. Square key (77).
19. Coupling cover (76).
20. Shaft (90).
21. Set collar (74).
22. Flange bearing (71).
23. Set collar (69).
24. Clutch sprocket half (68).
25. Set collar (63).
26. Yoke (54).
27. Clutch slide half (55).
28. Square key (56).
29. Set collar (58).
Loosen.
Remove.
Remove.
Remove.
a.
Remove all paint from set
collar (74) to end.
b.
Clean and polish with emery
paper.
Loosen socket setscrew (96)
and remove.
Remove.
Loosen socket setscrew (70)
and remove.
Remove.
Loosen socket setscrew (49)
and remove.
Unscrew two hex bolts (61),
flat washers (53) and hex nuts
(52) and remove.
Remove.
Remove.
Loosen socket setscrew (57)
and remove.
Mark location on shaft (90)
to aid in reassembly.
Mark location on shaft (90)
to aid in reassembly.
Mark location on shaft (90)
to aid in reassembly.
Mark location on shaft (90)
to aid in reassembly.
Mark location on shaft (90)
to aid in reassembly.
NOTE
In steps 30 and 31, the parts are removed from the right end of the shaft (90).
30. Set collar (99).
31. Flange bearing (93
Loosen socket setscrew (45)
and remove.
Remove.
Mark location on shaft (90)
to aid in reassembly.
8-46
Back to Top
