TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 412 of 694
TM 5-3895-372-20
CEMENT SYSTEM.
8-15.
CEMENT SYSTEM DRIVE MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
C. CLEANING AND INSPECTION.
32. Two flange bearings
(71) and (93).
33. Four grease fittings
(62), (67), (75), and (92).
34. Sprocket (97), clutch
sprocket half (68), and
two idler sprockets (43)
and (89).
35. Three chains (47), (65),
and (80).
D.
ASSEMBLY.
36. Flange bearing (93).
37. Set collar (99).
38. Square key (48).
39. Sprocket (97).
40. Set collar (58).
41. Square key (56).
42. Clutch slide half (55).
43. Yoke (54).
44. Set collar (63).
45. Clutch sprocket half (68).
46. Set collar (69).
47. Flange Bearing (71).
48. Set collar (74).
Clean and inspect for rough-
ness and looseness.
Inspect for damaged or broken
fittings.
Inspect for excessively worn
or broken cogs.
Clean and inspect for damaged
or excessively worn links.
Install.
Install and tighten socket set-
screw (45).
Install on shaft (90).
Install and tighten socket
setscrew (46).
Install and tighten socket
setscrew (57).
Install.
Install.
Install and secure with two
hex bolts (61), flat washers (53),
and hex nuts (52).
Install and tighten socket set-
screw (49).
Install.
Install and tighten socket set-
screw (70).
Install.
Install and tighten socket
setscrew (96).
Replace, if required.
Replace, if required.
Replace, if required.
Position in location marked
during disassembly.
Position in location marked
during disassembly.
Position in location marked
during disassembly.
Position in location marked
during disassembly.
Position in location marked
during disassembly.
8-48
Back to Top
