TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 398 of 694

TM 5-3895-372-20

CEMENT SYSTEM.

B-12.

SPRING TINE MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A.

INSPECTION (Continued).

2. Notched arm (4).

Check that arm can be

Adjust if necessary (Part C).

pressed down 3/4-1 in.

(19-25 mm) when shaft

link (3) is in notch.

B.

HAMMER REPLACEMENT.

CAUTION

Always check adjustment after replacing a hammer.

3. Shaft link (3).

Remove from notch.

4. Screw (5) and nut (7).

Unscrew and remove.

Remove

hammer (6).

5. Hammer (6).

Attach to spring tine with screw

(5) and nut (7).

Tighten.

C.

ADJUSTMENT.

6. Shaft link (3).

Try placing link in a different.

If this does not work, go to

notch of arm (4).

You should

Step 7.

be able to press arm down

3/4-1 in.

(19-25 mm) against

spring tension.

7. Shaft (9).

Turn with pipe wrench until

arm goes down 3/4-1 in. (19-

25 mm) against spring (8) when

shaft link (3) is in a notch.

8-34