TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 465 of 694

TM 5-3895-372-20

MIXER-AUGER SYSTEM.

9-15. MINISK IRT ASSEMBLY MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

B. INSTALLATION.

3.

New rubber (4).

a.Place under old rubber and

mark holes with pencil.

b.Cut out holes with a 5/16

in. punch or equivalent.

4.

Inner ring (3), rubber

Assemble and aline bolt holes. Opening in rubber must face

(4), and outer ring (5).

forward when hooks are laid

over pegs.

5.

Thirteen capscrews (2)

Install and tighten evenly.

and nuts (1).

6.

Inner ring (3), rubber (4),

Lift into swivel frame. Hook

and outer ring (5).

onto pegs.

7.

Mixer auger.

Raise and latch. Always utilize safety chain.

9-48