TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 461 of 694
TM 5-3895-372-20
MIXER-AUGER SYSTEM.
9-14. SWIVEL RING MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
D. INSTALLATION OF TROUGH (Continued).
12.
Right hanger
a.Slide onto pin.
bracket (5).
b.Attach to trough with four
Capscrews are installed from
nuts (7) and capscrews (6).
the inside.
Tighten nuts.
13.
Two washers (4).
Slide over pins.
14.
Two cotter pins (3).
Slide through pins.
Bend cotter
pins to hold pins in place.
15.
Winch cable.
Draw up slack and remove hoist
from trough.
E. OPERATIONAL CHECK.
16.
Mixer trough.
a.Turn trough from side to side.
Check for sticking or binding
of swivel ring.
b.Raise trough and latch.
Always utilize safety chain.
9-44
Back to Top
