TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 50 of 694
TM 5-3895-372-20
CHAPTER 4
POWER TRAIN
4-1.
OVERVIEW.
This chapter provides you with the following information related to power train maintenance.
a.
All required special tools and equipment.
b.
Troubleshooting procedures.
c.
Maintenance procedures.
Section I REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
14-2. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
14-3. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
No special tools, TMDE, or support equipment are required for power train maintenance procedures described in this
chapter.
14-4. SPARES AND REPAIR PARTS.
Spares and repair parts are listed and illustrated in the Repair Parts and Special Tools List covering Organizational
Maintenance for this equipment (TM 5-3895-372-20P).
Section II TROUBLESHOOTING
4-5.INTRODUCTION.
Troubleshooting procedures for the power train are given in table 4-1.
It is arranged by malfunctions, in the following
order:
a.
Noisy shaft bearings (Malfunction No.
1).
b.
Power train V-belt slippage (Malfunction No.
2).
c.
Main clutch slips (Malfunction No.
3).
d.
Angle drive gear box runs hot, is noisy (Malfunction No.
4).
4-1
Back to Top
