TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 43 of 694
TM 5-3895372-20
Table 3-1.
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Q - Quarterly
S - Semiannually
A - Annually
B - Biennially
H - Hours
M - Miles
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE:
Check for and have repaired,
NO
Q
S
A
B
H MI
filled, adjusted as needed
NOTE
PERFORM OPERATOR/CREW PMCS PRIOR TO OR IN CON-
JUNCTION WITH ORGANIZATIONAL PMCS IF:
a.
There is a delay between the daily operation of the equipment
and the organizational PMCS.
b.
Regular operator is not assisting/participating.
ELECTRICAL SYSTEM
1
•
Check wiring harness for corrosion and bare wires.
Replace defective
wiring.
2
•
Check all lights for proper operation.
Replace defective lamps and lights.
BODY
3
•
Replace all mounting tie downs and fasteners that are badly damaged
or broken.
Replace all broken reflectors.
MAIN DRIVE
4
•
Check belts for wear and damage.
Replace defective belts.
5
•
Check all U-joints.
Check for wear and cracks.
Replace defective U-joints.
6
•
Service reversing gear box.
7
•
Service angle drive gear box.
8
•
Adjust main clutch, if necessary.
WATER SYSTEM
9
•
Check for deterioration and leaks in coolant lines, hoses, fittings,
valves, filter and tank.
Repair leaks or replace items as needed.
10
•
Service water system strainer.
11
•
Service system for lowest freezing temperature expected.
SAND AND STONE BINS
12
•
Check screens and repair or replace broken rods.
13
•
Check sand and stone bin front seal cracked or damaged seals/
Change 1
3-5
Back to Top
