TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 600 of 694

TM 5-3895-372-20

ELECTRIC WINCH.

12-8.

HYDRAULIC MOTOR MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A. REMOVAL (Continued).

4.

Winch control box.

Press the LOWER button until

cable is completely paid out.

5.

Two nuts, lockwashers,

Remove.

and bolts (3).

6.

Clamp (4).

Remove.

7.

Setscrew (9).

Loosen.

8.

Cable (2).

Pull out of stop sleeve (8) and

reel (1).

Remove the cable.

B. CLEANING AND LUBRICATION.

9.

Cable (2).

a. Wipe with a damp rag.

b. Inspect for rust or fraying.

Replace if necessary.

c. Oil with CW.

d. Wipe off excess oil.

C. INSTALLATION.

10. Cable (2).

a. Thread through three

pulleys on trough

support frame.

b. Thread through hole in

reel (1) and through

stopsleeve (8).

11. Setscrew (9).

Tighten.

12. Clamp (4).

Slide spool toward motor and

gear box, and install clamp

around shaft.

13. Two nuts, lockwashers,

Install and tighten securely.

and bolts (3).

14. Cable end (7).

a. Thread through pulley on

trough.

b. Thread through anchor (6)

and back through two

clamps (5).

12-10