TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 610 of 694

TM 5-3895-372-20

ELECTRIC WINCH.

12-10.

WINCH ASSEMBLY MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A. REMOVAL (Continued).

6.

Woodruff key.

Remove from gear box shaft.

7.

Motor and gear box

Remove from mounting frame.

assembly (7).

8.

Setscrew (4).

Loosen.

9.

Bushing (5).

Remove.

B. INSTALLATION.

10. Bushing (5).

Install on gear box shaft.

Do not tighten setscrew.

11. Motor and gear

Install in frame.

box assembly (7).

12. Woodruff key.

Install in gear box shaft.

13. Motor and gear

Simultaneously slide sprocket

box assembly (7).

(2) and chain (3) onto gear

box shaft.

14. Four bolts, washers,

Install and tighten securely.

spacers, and nuts (6).

15. Bushing (5).

Slide bushing against frame

bearing and tighten setscrew (4).

16. Setscrew (1).

Tighten.

17. Three power cables (9).

Install on motor terminals.

18. Three nuts and lock-

Install and tighten securely.

washers (8).

12-20