TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 63 of 694
TM 5-3895-372-20
POWER TRAIN.
4-9. PTO TO PTO BELTS SHAFT - UNIVERSAL JOINTS MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
1.
Two lock wires (3).
Cut and remove.
One on each end of shaft.
2.
Two setscrews (2).
Loosen.
One on each yoke.
Before removing female shaft (4) and male shaft (6), punch mark shafts for reassembly
alinement. Damage to universal joints may occur if shafts are not alined.
3.
Yoke (1).
Remove with attached female
It may be necessary to tap off
shaft (4).
PTO shaft with hammer.
4.
Yoke (5).
Remove with attached male
It may be necessary to tap off
shaft (6).
bearing shaft with hammer.
B.
DISASSEMBLY.
5.
Eight retainers (9).
Remove.
6.
Eight bearings (10).
Remove.
Remove the first bearing by
tapping gently on the opposite
bearing. Remove bearing and
tap cross back toward first
bearing. Repeat until all
bearings are removed.
7.
Yoke (1) and yoke (8).
Separate.
4-14
Back to Top
