TM 5-3895-372-34
Figure 2-26.
Remove /Install Access Panels
(8
)
Install brace (2, fig.
2-24) to support rail (22) with bolts, washers, and nuts (15 and 20).
(9
)
Install nuts (10) and ball joints (9) on rod (11), if removed.
(10
)
Install nuts and washers (12); tighten.
(11
)
Install nuts (6) on rods (7), if removed.
(12
)
Install two washers and cotter pins (8).
(13
)
Install clutch lever (21) and bolt and washer (18).
Tighten bolt.
(14
)
Adjust clutch.
(Refer to TM 5-3895-372-20.)
(15
)
Install access covers (1, fig.
2-22).
2-41