TM-5-3895-372-34
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
SEPTEMBER 1980
TM-5-3895-372-34 - Page 47 of 120
TM 5-3895-372-34
Figure 2-21.
Lifting Bins.
(15) Set left and right rear fenders in place.
Install twenty-one bolts, lockwashers and nuts on each fender and tighten
bolts securely.
(16) Set rear accessory frame in place and secure with hexagon bolt, lockwashers, and nut (3, fig.
2-14).
(17) Install four hexagon bolts, lockwashers, and nuts (2) and tighten securely.
(18) Install two hexagon bolts, lockwashers, and nuts (1) and tighten securely.
(19) Install cable (2, fig.
2-13), box (3) and secure with two bolts, nuts, lockwashers (1) and tighten securely.
(20) Install microswitch (3, fig.
2-12) and secure with four capscrews and lockwashers (2). Install cable ties (1).
(21) Install control box cover (1, fig.
2-11) and secure with four screws (2).
2-34
Back to Top
