OPERATION - Continued
a.
Place hand pump selector valve lever (Figure 8, Item 24) in center roller up position.
24
0.25 inch
(0.6 cm)
25
Figure 8.
Position Center Roller.
NOTE
•
There should be a 0.25 in. (0.6 cm) gap between rear rollers and ramp bay.
•
Interior bay does not require use of hydraulic pump.
b.
Pump hydraulic pump (Figure 8, Item 25) until rear of ramp bay lifts off rear rollers.
TM 5-3990-263-13&P
0011
0011-10