TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 417 of 728

FIELD MAINTENANCE

LABEL REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Drill, Electric, Portable, 1/4-inch

(WP

0078, Table 2, Item 1)

Drill Set, Twist (WP

0078, Table 2, Item 1)

Tool Kit, Blind Rivet (WP

0078, Table 2, Item 1)

Tool Kit, General Mechanics: Automotive

(WP

0078, Table 2, Item 2)

Materials/Parts

Drive Screw (WP

0082, Table 1, Item 30) Qty:

4

Rivet (WP

0082, Table 1, Item 29) Qty:

4

References

Parts Manual (WP

0073, Figure 2)

Parts Manual (WP

0073, Figure 10)

Equipment Condition

Load removed from the BAP. (WP

0008)

BAP unloaded from the CBT. (WP

0006)

REMOVAL

NOTE

•

All nine BAP labels (decals/data plates) are replaced in the same manner.

•

Eight labels are secured with drive screws. The label on the toolbox door is secured with

rivets.

Remove label (Figure 1, Item 1) and four drive screws (Figure 1, Item 2) or rivets (Figure 1, Item 3) from the

BAP.

TM 5-3990-263-13&P

0051

0051-1