TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 413 of 728

FIELD MAINTENANCE

REFLECTOR REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanics: Automotive

(WP

0078, Table 2, Item 2)

Materials/Parts

Lockwasher (WP

0082, Table 1, Item 41) Qty:

2

References

Parts Manual (WP

0073, Figure 10)

Equipment Condition

Load removed from the BAP. (WP

0008)

BAP unloaded from the CBT. (WP

0006)

REMOVAL

1.

Remove two screws (Figure 1, Item 1), nuts (Figure 1, Item 2), lockwashers (Figure 1, Item 3), and amber

reflector (Figure 1, Item 4) from A-frame (Figure 1, Item 5). Discard lockwashers.

2

3

5

1

4

Figure 1.

Front Amber Reflector Removal.

NOTE

•

Steps (2) through (4) are the same for removal of road-side and curb-side reflectors.

•

Engage pin lock assembly in manual position before removing or installing reflector.

2.

Remove two screws (Figure 2, Item 6), lockwashers (Figure 2, Item 7), and amber reflector (Figure 2, Item 8)

from BAP frame (Figure 2, Item 9). Discard lockwashers.

TM 5-3990-263-13&P

0050

0050-1