TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 405 of 728

FIELD MAINTENANCE

REAR BUMPER ASSEMBLY REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanics: Automotive

(WP

0078, Table 2, Item 2)

Materials/Parts

Cotter Pin (WP

0082, Table 1, Item 36)

References

Parts Manual (WP

0073, Figure 7)

WP

0070

Equipment Condition

Load removed from the BAP. (WP

0008)

BAP unloaded from the CBT. (WP

0006)

REMOVAL

NOTE

•

This task is for older model BAPs only, new model BAPs not equipped with rear bumper

assembly. Repair and/or replacement is at the discretion of the Unit Commander.

•

This task can be used for the road-side, curb-side, or middle roller bumpers. The middle

roller bumpers are shown.

1.

Remove cotter pin (Figure 1, Item 1) from bumper shaft (Figure 1, Item 2). Discard cotter pin.

3

1

4

2

Figure 1.

Rear Bumper Assembly Removal.

2.

Remove bumper shaft (Figure 1, Item 2) and three roller bumpers (Figure 1, Item 3) from BAP frame (Figure

1, Item 4).

TM 5-3990-263-13&P

0048

0048-1