TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 427 of 728

DISASSEMBLY - Continued

40

38

39

43

42

38

6

40

5

3

41

5

Figure 5.

BAP Front Pin Disassembly.

14.

Remove pin lock guide (Figure 5, Item 6) from pin lock bracket (Figure 5, Item 5).

15.

Remove four screws (Figure 5, Item 41) and washers (Figure 5, Item 42) from pin lock bracket (Figure 5, Item

5).

16.

Remove pin lock bracket (Figure 5, Item 5) from frame (Figure 5, Item 3).

NOTE

Perform Step (17) if grease fitting is damaged.

17.

Remove grease fitting (Figure 5, Item 43) from pin lock guide (Figure 5, Item 6).

END OF TASK

CLEANING

1.

Refer to General Maintenance Instructions (WP

0038) for general cleaning instructions.

2.

Lubricate all pins in accordance with

(WP

0070).

END OF TASK

INSPECTION

1.

Refer to General Maintenance Instructions (WP

0038) for general inspection instructions.

2.

Measure wear pad (Figure 6, Item 1). If wear pad (Figure 6, Item 1) is worn to within 1/16 inch (1.6 mm) of

screw (Figure 6, Item 2) or pin lock jaw (Figure 6, Item 3), wear pad (Figure 6, Item 1) can be rotated 180

degrees and reused. If bottom and top edges of wear pad (Figure 6, Item 1) show excessive wear, replace

wear pad (Figure 6, Item 1).

TM 5-3990-263-13&P

0052

0052-5