TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 439 of 728

FIELD MAINTENANCE

WINCH FRAME LOCKING LEVER OUTBOARD RETAINER BLOCKS FIELD REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Welder, Portable (WP

0078, Table 2, Item 1)

Hand Grinder, Portable (WP

0078, Table 2, Item

1)

Clamps (WP

0078, Table 2, Item 1)

Materials/Parts

Block, Retainer (WP

0081, Table 1, Item 1)

Rod, Welding 336 or 340 (WP

0081, Table 1, Item

25) Qty:

1

Materials/Parts (cont.)

Rod, Welding MG600 (WP

0081, Table 1, Item

24) Qty:

1

Shim Stock, 0.040 in. (WP

0082, Table 1, Item 1)

Qty:

1

References

Parts Manual (WP

0073, Figure 12)

Equipment Condition

Load removed from the BAP. (WP

0008)

BAP removed from the CBT. (WP

0006)

REMOVAL

NOTE

•

Use MG600 1/16 in. filler rod if using a TIG welder.

•

Use 336 or 340 welding rod if stick welding.

Grind off any remaining weld or broken retainer block from locking pin (Figure 1, Item 1).

VIEW A

A

A

1

1

Figure 1.

Winch Frame Locking Lever Outboard Retainer Blocks Field Removal.

END OF TASK

TM 5-3990-263-13&P

0054

0054-1