TM-5-3990-263-13-P
PALLET, ADAPTER, BRIDGE, M15
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
APRIL 2012
TM-5-3990-263-13-P - Page 501 of 728
REMOVAL - Continued
18
49
40
45
43
42
44
48
47 46
49
18
41
Figure 5.
Transload Roller Hydraulic System Cushion Clamps Removal.
13.
Remove nut (Figure 5, Item 46), lockwasher (Figure 5, Item 47), and clamp (Figure 5, Item 48) from tube (Figure
5, Item 44) and frame (Figure 5, Item 18). Discard lockwasher.
14.
Remove tube (Figure 5, Item 44) from two fittings (Figure 5, Item 49). Remove two fittings (Figure 5, Item 49)
from frame (Figure 5, Item 18).
END OF TASK
CLEANING
Refer to General Maintenance Instructions (WP
0038) for general cleaning instructions.
END OF TASK
INSPECTION
Refer to General Maintenance Instructions (WP
0038) for general inspection instructions.
END OF TASK
INSTALLATION
NOTE
•
Steps (1) through (6) are for curb side only. Perform Step (7) for road-side hydraulics.
•
Apply Antiseizing tape to all fittings that fit into cylinders or manifolds.
1.
Install two fittings (Figure 6, Item 49) on frame (Figure 6, Item 18).
TM 5-3990-263-13&P
0061
0061-5
Back to Top
