TM 5-4210-249-13&P-1
0104-52
DRAFT
0104
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
TFFT02890
Step 78.
Check for 0.5 to 1 amp nominally through bumper turret motor power wire (red) from
bumper turret junction box 9-pin terminal strip, terminal 2 to bumper turret motor wire
(red) termination which was disconnected in Step 73.
a.
If there is less than 0.5 amp through bumper turret motor power wire
(red), replace bumper turret motor (WP 0571).
b.
If there is greater than 1 amp through bumper turret motor power wire
(red), replace bumper turret (WP 0569).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION