TM 5-4210-249-13&P-2
0247-1
DRAFT
0247
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE REMOTE OIL FILTER HEAD AND HOSE REPLACEMENT
INITIAL SETUP:
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Engine components become hot during normal operation.
Allow engine to cool
completely prior to performing this task.
Failure to comply could result in serious
injury to personnel.
NOTE
•
Note position of hoses prior to removal to ensure proper installation.
•
A small amount of oil may remain in hoses and fitting.
Position a suitable container under
the hoses and fittings to catch any drainage.
1.
Remove two hoses (1) and (2) from elbows (3) and (4).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT1765A
WARNING
ICON 13
Tools and Special Tools
Drain Pan (WP 0622, Item 9)
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Oil, Lubricating (WP 0625, Item 37)
Preformed Packing (1)
Preformed Packing (2)
Materials/Parts (continued)
Preformed Packing (2)
Preformed Packing (2)
References
WP 0615, Fig. 12
Equipment Conditions
Pump house panel O removed (WP 0540)
Water pump engine oil filter removed (WP 0244)