TM 5-4210-249-13&P-2
0292-1
DRAFT
0292
FIELD LEVEL MAINTENANCE
FOAM SYSTEM MULTI-METERING VALVE (AUTOMATIC) REPLACEMENT
INITIAL SETUP:
REMOVAL
CAUTION
Air lines may be removed directly from elbows and fittings, or may remain attached
to elbows and fittings and removed as an assembly.
If air lines are removed from
elbows and fittings care must be taken not to damage air line.
If sealing surface of
air line is damaged air line must be repaired or replaced.
NOTE
Tag and mark air lines prior to removal to ensure proper installation.
1.
Remove six air lines (1) from elbows (2).
2.
Remove two couplings (3) and (4) from multi-metering valve (5) and two tees (6) and (7) (WP 0483).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT00157
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Compound, Sealing, Pipe Thread
(WP 0625, Item 21)
Lockwasher (2)
Lockwasher (2)
References
WP 0483
WP 0615, Fig. 49
Equipment Conditions
Air system drained (TM 9-2320-347-10)
Pump house panel B removed (WP 0540)
Water system drained (WP 0041)
Foam system drained (WP 0041)
Pump house heater diagnostics module
removed (WP 0415)