TM 5-4210-249-13&P-2
0132-1
DRAFT
0132
FIELD LEVEL MAINTENANCE
FOAM FLUSH INDICATOR DOES NOT ILLUMINATE (PUMP OPERATOR'S PANEL)
INITIAL SETUP:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
FOAM FLUSH INDICATOR DOES NOT ILLUMINATE (PUMP OPERATOR'S PANEL)
NOTE
•
Ensure system air pressure is at least 85 psi (586 kPa) when operating foam flush valve
during this procedure.
System air pressure is required to activate valves.
•
Do not engage water pump engine during this procedure.
Valve operation can be checked
without water pump operation.
•
Valve operations can be checked by observing valve shaft rotation.
Valves are open when
tabs or yellow paint tabs are aligned with direction of fluid flow.
•
Step 1 will ensure that foam flush system is operating properly or if fault exists in lamp,
indicator, or wires leading to indicator.
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
References
TM 9-2320-325-14&P
WP 0004
WP 0007
WP 0019
WP 0101
References (continued)
WP 0325
WP 0326
WP 0327
WP 0459
WP 0539
Equipment Conditions
Water pump engine OFF (WP 0022)
Engine OFF (TM 9-2320-347-10)
Wheels chocked (TM 9-2320-347-10)