TM 5-4210-249-13&P-2
0133-1
DRAFT
0133
FIELD LEVEL MAINTENANCE
FOAM SYSTEM INDICATOR DOES NOT ILLUMINATE (CAB)
INITIAL SETUP:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
FOAM SYSTEM INDICATOR DOES NOT ILLUMINATE (CAB)
TFFT02492
NOTE
Step 1 will ensure that foam system is operating properly or fault exists in bulb, indicator,
or wires leading to indicator.
Step 1.
Open pump operator’s panel (WP 0019).
Turn battery disconnect switch to ON position
(WP 0007).
Put cab FOAM SYSTEM switch to on position (WP 0004) and release.
Check if pump operator’s panel FOAM SYSTEM indicator illuminates.
If pump operator’s panel FOAM SYSTEM indicator does not illuminate,
troubleshoot Foam Not Delivered From All Systems (Bumper Turret, Ground
Sweeps, and Manual Metering Controls) or System Does Not Shut
Off (WP 0094).
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
References
TM 9-2320-325-14&P
WP 0004
WP 0007
WP 0019
References (continued)
WP 0094
WP 0311
WP 0313
WP 0443
Equipment Conditions
Water pump engine OFF (WP 0022)
Engine OFF (TM 9-2320-347-10)
Wheels chocked (TM 9-2320-347-10)