TM 5-4210-249-13&P-2
0190-1
DRAFT
0190
FIELD LEVEL MAINTENANCE
CREW CAB DOOR/DOOR HINGE ADJUSTMENT
INITIAL SETUP:
ADJUSTMENT
NOTE
•
Adjustment is performed whenever the door is replaced or will not close properly.
•
Perform Step (1) if door has not been replaced.
•
Perform Step (2) if door has been replaced.
1.
Remove two screws (1) and spacer (2) from door strap (3) and crew cab (4).
2.
Loosen 12 screws (5) and 11 screws (6) 3/4 turn from hinge (7).
NOTE
It may be necessary to open and close door several times before Step (3) can be
accomplished.
3.
Align position of door (8) to permit proper closing and locking.
4.
Tighten 12 screws (5) and 11 screws (6).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT01400
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
References
WP 0615, Fig. 119
Equipment Conditions
Water pump engine OFF (WP 0022)
Engine OFF (TM 9-2320-347-10)
Wheels chocked (TM 9-2320-347-10)