TM 5-4210-249-13&P-2
0210-1
DRAFT
0210
FIELD LEVEL MAINTENANCE
CREW CAB AIR CONDITIONER COMPRESSOR AND MOTOR ASSEMBLY REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
•
To remove belt guard and compressor, mounting plate with compressor and motor must
be removed from crew cab floor as an assembly.
•
Tag and mark connectors, wires, and hoses prior to removal to ensure proper installation.
1.
Disconnect connector (1).
2.
Remove insulation tape (2) from hose (3).
3.
Remove two hoses (3) and (4) and preformed packings (5) and (6) from air conditioner compressor (7).
Discard preformed packings.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT01822
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Bork Insulation Tape
(WP 0625, Item 10)
Preformed Packing (1)
Preformed Packing (1)
Lockwasher (4)
Lockwasher (5)
Locknuts (4)
Lockwasher (4)
Lockwasher (4)
Personnel Required
MOS 63B, Wheeled vehicle mechanic (2)
References
TM 9-2320-325-14&P
WP 0189
WP 0614, Fig. 5
Equipment Conditions
Crew cab bench seat and access panel
removed (WP 0501)
Crew cab air conditioner coolant
recovered (WP 0217)