TM 5-4210-249-13&P-3
0558-14
DRAFT
0558
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
16. Lightly lubricate six screws (62).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
17. Apply sealant to three locknuts (60) to mark torque point.
18. Install each of two transmission mounting brackets (59) on three biscuits (66) and transmission mounting
support (67) with three screws (62), washers (63), plate (64), three mounting biscuits (65), washers (61), and
locknuts (60).
Tighten screws to 170 lb.-ft. (231 N•m).
19. Remove lifting device, two nuts (57), and eye bolts (56) from rear attachment points (58) and transmission
mounting brackets (59).
TFFT01922A
WARNING
ICON 30, 44, 27