TM 5-4210-249-13&P-3
0321-1
DRAFT
0321
FIELD LEVEL MAINTENANCE
PUMP OPERATOR’S PANEL ENGINE DIAGNOSTICS PLUG REPLACEMENT
INITIAL SETUP:
REMOVAL
1.
Loosen two screws (1).
2.
Remove protective sleeve (2) from pump engine diagnostics plug (3).
3.
Remove cap (4) from pump engine diagnostics plug (3).
4.
Remove locknut (5), screw (6), and cable (7) from pump engine diagnostics plug (3) and pump panel (8).
Discard locknut.
5.
Remove three locknuts (9) and screws (10) from pump engine diagnostics plug (3) and pump panel (8).
Discard locknut.
6.
Close pump operator’s panel housing (WP 0325)
NOTE
Tag and mark wires prior to removal to ensure proper installation.
7.
Using extractor tool, remove six wires (11) from pump engine diagnostics plug (3).
8.
Remove screw (12) and cable (7) from cap (4).
END OF TASK
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT00592
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Locknut (1)
Locknut (3)
References
WP 0615, Fig. 56
Equipment Conditions
Batteries disconnected (TM 9-2320-325-14&P)
Pump operator’s panel housing opened
(WP 0325)