TM 5-4210-249-13&P-3
0375-1
DRAFT
0375
FIELD LEVEL MAINTENANCE
CONTROL VALVE REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
•
Remove cable ties as required.
•
Tag and mark wires prior to removal to ensure proper installation.
•
All control valves are removed the same way.
Ground sweeps “B” # 3 shown.
1.
Disconnect connector (1).
2.
Remove two screws (2), washers (3), valve (4), preformed packing (5), and three preformed packings (6) from
manifold (7).
Discard preformed packings.
END OF TASK
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT1237
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
Preformed Packing (1)
Preformed Packing (3)
References
WP 0615, Fig. 48
Equipment Conditions
Wheels chocked (TM 9-2320-347-10)
Batteries disconnected (TM 9-2320-325-14&P)
Pump house panel S removed (WP 0540)
Air system drained (TM 9-2320-347-10)