TM 5-4210-249-13&P-3
0462-1
DRAFT
0462
FIELD LEVEL MAINTENANCE
SINCGARS AND TWO-WAY RADIO INTERCOM CABLE REPLACEMENT
INITIAL SETUP:
SINCGARS INTERFACE WIRE HARNESS REMOVAL
NOTE
•
Tag and mark wires prior to removal to ensure proper installation.
•
Note routing of intercom wire harness prior to removal to ensure proper installation.
•
Note position and remove cable ties, split loom, and cushion clips as required.
1.
Loosen thumbscrew (1) and remove intercom wire harness connector (2) from electronic mounting base (3).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT03336
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
References
TM 9-2320-325-14&P
WP 0615, Fig. 59
Equipment Conditions
Intercom removed (WP 0395)
Personnel cab panel A removed (WP 0311)
SINCGARS receiver/transmitter and power
adapter removed (TM 11-5820-890-10)