TM 5-4210-249-13&P-3
0463-1
DRAFT
0463
FIELD LEVEL MAINTENANCE
VALVE CONTROL WIRE HARNESS REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
•
Tag and mark connectors prior to removal to ensure proper installation.
•
Note position and remove cable ties, looms, and cushion clips as required.
•
Note routing of wire harness prior to removal to ensure proper installation.
1.
Disconnect TANK DRAIN valve control connector (1) from valve control wire harness connector (2).
2.
Disconnect GROUND SWEEPS valve control connector (3) from valve control wire harness connector (4).
3.
Disconnect EDUCTOR valve control connector (5) from valve control wire harness connector (6).
4.
Disconnect FLUSH valve control connector (7) from valve control wire harness connector (8).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT03115
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
References
WP 0615, Fig. 90
Equipment Conditions
Driver side crew cab access panel
removed (WP 0499)
Pump house panels Q and S removed (WP 0540)