TM 5-4210-249-13&P-3
0464-1
DRAFT
0464
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE WIRE HARNESS REPLACEMENT
INITIAL SETUP:
WATER PUMP ENGINE WIRE HARNESS REMOVAL
NOTE
•
Tag and mark wires prior to removal to ensure proper installation.
•
Note routing of pump house engine wire harness prior to removal to ensure proper
installation.
•
Note position and remove cable ties, split loom, and cushion clips as required.
•
Starter solenoid is accessed through pump house panel G.
1.
Remove screw (1), retaining clip (2), and wire (3) from starter solenoid (4).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT03354
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
References
WP 0615, Fig. 101
Equipment Conditions
Water pump engine radiator removed (WP 0481)
Crew cab access panels removed (WP 0499)
Pump house panels O and Q removed (WP 0540)