TM 5-5420-202-10
0019
OPERATOR MAINTENANCE
OPERATION UNDER USUAL CONDITIONS - CROSSING BRIDGE
INITIAL SETUP:
Tools and Special Tools
Pinch Bar (WP 0077, Table 2, Item 5)
References
WP 0046
GENERAL
This work package provides instructions for crossing the bridge for the M48A5 Armored Vehicle Launched Bridge
(AVLB) and M60A1 AVLB under usual/normal conditions. If equipment will not operate, refer to Auxiliary Systems
and Controls Procedures (WP 0046).
CROSSING BRIDGE
CAUTION
• DO NOT exceed 8 mph (13 kph) crossing speed. Failure to comply may result in
excessive wear and tear to the MLC 60 or MLC 70 bridge.
• Ensure vehicle is in line with bridge while crossing. DO NOT stop, accelerate, or shift
gears while crossing bridge. These actions may result in damage to vehicle or bridge.
Proceed across bridge (Figure 1).
Figure 1.
Crossing Bridge.
END OF TASK
ENDOFWORKPACKAGE
0019-1/2 blank