TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

  TM-5-5420-202-10 - Page 152 of 535

TM 5-5420-202-10
0020
NOTE
If pintles do not line up with sockets, reposition vehicle.
14.Pull overhead lever (Figure 6, Item 5) until outrigger (Figure 6, Item 4) is f rmly on ground and overhead
cylinder is all the way out.
Figure 6.
Extending Outrigger.
15.Slowly move vehicle forward and align tongue (Figure 7, Item 1) and pintles (Figure 7, Item 6) with pintle
sockets (Figure 7, Item 5).
16.Pull tongue lever (Figure 7, Item 3) up or down until pintles (Figure 7, Item 6) are seated in pintle sockets
(Figure 7, Item 5) and tongue (Figure 7, Item 1) fully contacts bridge diaphragm (Figure 7, Item 2).
17.Push lock lever (Figure 7, Item 4) down to extend locking pins.
Figure 7.
Pintle Sockets.
0020-5
RETRIEVING BRIDGE - CONTINUED


Back to Top