TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

TM-5-5420-202-10 - Page 466 of 535

0073

TM 5-5420-202-10

Brake Controls:

1. Use 1/2 inch drive ratchet and 9/16 inch socket to remove six screws (Figure 1, Item 2) and lockwashers

(Figure 1, Item 3) securing two rear access covers (Figure 1, Item 4) on underside of hull. Remove two rear

access covers and gaskets.

2. Use adjustable wrench to remove drain plug (Figure 1, Item 5) from left and right brake control housings

(Figure 1, Item 1). Allow water to drain.

3. Use adjustable wrench to install drain plug (Figure 1, Item 5) in left and right brake control housings

(Figure 1, Item 1).

4. Install two rear access covers (Figure 1, Item 4) and gaskets in position and secure with six screws

(Figure 1, Item 2) and lockwashers (Figure 1, Item 3).

Figure 1.

Brake Controls.

0073-4

MAINTENANCE UNDER ADVERSE CONDITIONS - CONTINUED

Suspension System: Lubricate all lubrication f ttings. Refer to LO 5-5420-202-13.

Air Cleaner:

1. Use adjustable wrench to remove air cleaner drain plug (Figure 2, Item 1).

2. Check for water leakage into air cleaner.

3. If water leakage into air cleaner is evident, notify f eld maintenance.

4. If no water is present, use wrench and install drain plug (Figure 2, Item 1).

After Fording - Continued