TM 5-5420-202-10
0071
6. Lift grille doors on right and left sides of vehicle and check for loose or missing air cleaner input and output
hose clamps. Tighten loose clamps. If clamps are missing, notify f eld maintenance and do not start vehicle
until clamp is replaced.
7. Remove lower inspection plug (Figure 2, Item 2) from air cleaner (Figure 2, Item 1). Use f ashlight to inspect
hole. If dust has accumulated above bottom row of tubes, replace plug (Figure 2, Item 2) and notify f eld
maintenance.
Figure 2.
Air Cleaner Inspection.
END OF TASK
END OF WORK PACKAGE
0071-3/4 blank
INSPECTION/ACCEPTANCE AND REJECTION CRITERIA - CONTINUED