TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

TM-5-5420-202-10 - Page 449 of 535

0069

TM 5-5420-202-10

REMOVAL

1. Rotate lens cap (Figure 1, Item 1) counterclockwise and remove from housing (Figure 1, Item 4).

.

2. Remove lamp (Figure 1, Item 3) from lens cap (Figure 1, Item 1). Discard lamp.

END OF TASK

INSPECTION

Inspect lens cap (Figure 1, Item 1) and O-ring (Figure 1, Item 2) for cuts or damage. If replacement is required,

notify f eld maintenance.

END OF TASK

INSTALLATION

1. Install new lamp (Figure 1, Item 3) in lens cap (Figure 1, Item 1).

2. Ensure O-ring (Figure 1, Item 2) is properly installed in lens cap (Figure 1, Item 1) and install lens cap

(Figure 1, Item 1) in housing (Figure 1, Item 4).

3. Rotate lens cap (Figure 1, Item 1) clockwise to tighten.

4. Turn MASTER BATTERY switch on. Refer to WP 0004.

5. Check operation of lamp (Figure 1, Item 3). Refer to WP 0008.

Figure 1.

Smoke Grenade Launcher Power Box Lamp Replacement.

END OF TASK

ENDOFWORKPACKAGE

0069-2