TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

TM-5-5420-202-10 - Page 451 of 535

0070

TM 5-5420-202-10

REMOVAL

NOTE

• Right and left headlights are identical.

• Some nuts may be too tight to loosen with f

in

gers. Tap rings with hammer, if necessary,

and then perform step 1 and step 2.

Turn nut (Figure 1, Item 2) counterclockwise and remove headlight (Figure 1, Item 1) from base assembly

(Figure 1, Item 3).

Figure 1.

Headlight Removal.

END OF TASK

STOWAGE

NOTE

There are two lampholders in the crew compartment. One is located behind operator’s

seat and one behind commander’s seat.

1. Unscrew dust cap (Figure 2, Item 5) from inside stowage mount (Figure 2, Item 4).

2. Position headlight (Figure 2, Item 1) on inside stowage mount (Figure 2, Item 4) and secure with nut

(Figure 2, Item 6).

3. Install dust caps (Figure 2, Item 2) on outside mounts (Figure 2, Item 3).

0070-2