TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 476 of 535
TM 5-5420-202-10
0074
Hydraulic Breather Filter
WARNING
•FRH f uid may cause irritation to the eyes and skin. Avoid contact with eyes, skin, and
clothing. Wear protective goggles, gloves, and clothing. If FRH comes in contact with eyes
or skin, flush area with water.
Failure to comply may result in personnel injury or illness.
• Degreasing solvent (MIL-PRF-680) is f ammable and may cause irritation to the eyes
or skin. Use in well-ventilated areas and keep away from heat and open f ame. Wear
protective goggles and clothing. If solvent comes in contact with eyes, f ush immediately
with water. If solvent comes in contact with skin, wash with soap and water. Failure to
comply may result in personnel injury, illness, or death.
1. HYDRAULIC BREATHER FILTER. Remove cap. Clean f lter in degreasing solvent (MIL-PRF-680), and dry
by shaking. Oil the f lter using FRH hydraulic fluid (WP 0079, Item 24).
DO NOT use OE/HDO oil.
In
extremely dusty conditions, service more frequently.
Every month, remove breather tube, clean with
degreasing solvent, and dip in FRH hydraulic fluid.
DO NOT use OE/HDO oil.
Tow Cables
WARNING
Degreasing solvent (MIL-PRF-680) is f ammable and may cause irritation to the eyes
or skin. Use in well-ventilated areas and keep away from heat and open f ame. Wear
protective goggles and clothing. If solvent comes in contact with eyes, f ush immediately
with water. If solvent comes in contact with skin, wash with soap and water. Failure to
comply may result in personnel injury or death.
1. TOW CABLES. Clean cables with degreasing solvent (MIL-PRF-680) and coat with corrosion preventive
compound (MIL-C-16173, Grade 1).
0074-9
LUBRICATION INSTRUCTIONS - CONTINUED
Back to Top
