TM 5-5420-202-20-1
Preventive
Item
No.
33
Internal
Semiannual
Maintenance Checks and Services for M60A1 AVLB Hull-
Location
Item to
Check/Service
Dust Detector
Filter Strip (Left
and Right Sides)
(If Equipped)
- Continued
Continued
Procedure
Using pipe cleaner (Item 75, Appen-
dix D), clean compressor housing
chamber. Use a small (not more
than 0.030 inch diameter) wire to
clean orifice. Blow out chamber and
orifice by mouth using a short piece
of tubing (Item 78, Appendix D).
Blow out (by mouth) compressor
housing hole.
Inspect cover chamber for contamina-
tion. Clean chamber as required.
Using pipe cleaner (Item 75, Appen-
dix D), clean drilled holes and blow
out (by mouth).
Replace three preformed packings
(page 7-130.13).
Not Fully Mission
Capable if:
Change 4
3-43