TM-5-5420-202-20-1

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 1 OF 4

OCTOBER 1985

TM-5-5420-202-20-1 - Page 117 of 1020

TM 5-5420-202-20-1

Item

No.

33

Preventive

Interval

Semiannual

Maintenance Checks and Services for M60A1 AVLB Hull-

Location

Item to

Check/Service

Dust Detector

Filter Strip (Left

and Right Sides)

(If Equipped)

- Continued

Continued

Procedure

Service dust detector filter strip.

Cut off approximately 2-inches from

end of filter strip.

Pull filter strip so that approximate

ly 1/2-inch will extend past edge of

cover when falter strip is installed.

Install filter strip and retainer in

cover. Filter strip must be approxi-

mately 1/2-inch past edge of cover.

Ensure all orifices are clean.

Install cover. Tighten three screws.

Perform dust detector operational

test (page 10-298.17).

Not Fully Mission

Capable if:

3-44

Change 4