TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 110 of 734

TM 5-5420-202 -20-2

THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (RIGHT SIDE)

TEST AND REPLACEMENT (Sheet 6 of 6)

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

Using 1-1/2 inch wrench, install and

tighten tube fitting (F) on adapter (G).

Using 1-1/2 inch wrench, tighten tube

fitting (D) at oil cooler.

Using 1-5/8 inch wrench, install adapter

(H).

Using hands, install tube fitting (J)

on adapter (H).

Go to other end of tube (K) and using 1-1/2

inch wrench, install and tighten tube

fitting (L) on adapter (M).

Using 1-1/2 inch wrench, tighten tube

fitting (J) at oil cooler.

Replenish oil lost during valve assembly

replacement (LO 5-5420-202-12).

Remove rags or drip pan from transmission

and oil cooler.

Start and run engine (TM 5-5420-202-10).

Check for oil leaks.

Shut down engine.

Install engine shroud (page 9-31).

Install transmission shroud (page 9-6).

End of Task

6-37